35kV Single Phase Potential Transformer 35kV Single Phase PT for Switchgear

35kV Single Phase Potential Transformer 35kV Single Phase PT for Switchgear

35kV to 110V | 0.2 metering 3P protection | epoxy or oil | IEC 61869 in stock
Send Inquiry
Description

Wenzhou Shuowei Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of 35kv single phase potential transformer 35kv single phase pt for switchgear in China, also supports customized service. Welcome to wholesale bulk advanced 35kv single phase potential transformer 35kv single phase pt for switchgear in stock here from our factory. If you have any enquiry about quotation, please feel free to email us.

 

5kV Single Phase Potential Transformer 35kV Single Phase PT for Switchgear

 

dfgdfgdg

What is a 35kV single phase potential transformer

A 35kV single phase potential transformer PT also known as a voltage transformer VT is an electromagnetic device that steps down 35kV primary voltage to a safe low secondary voltage typically 100V 110V or 120V for metering protection and control applications in medium voltage switchgear and substations.

This single phase PT is designed for 35kV class systems 34.5kV 36kV 38kV and is commonly used in incoming feeder panels busbar monitoring and synchronizing schemes where each phase requires individual voltage measurement.

 

Rated voltage ratio(kV) Rated secondary output(VA) Max.output(VA) Rated insulation level(kV)
  0.2 0.5 1level 3level 0.2/0.20.2/0.5 0.5/0.5 6P(3P)    
3​5000/​∣3/​100​∣3/100​ 120 300 500 800 / / 150 1000 40.5/95/200
​35000/3​∣3​/100​∣3​/100​∣3/100​ / / / / 60/6075/75 150/150 150 500/500 40.5/95/200

 

Q What is the difference between potential transformer PT and voltage transformer VT
A No difference. PT and VT are the same device. PT is traditional term VT is newer IEC term.

 

Q Single phase or three phase which should I choose
A Single phase PTs are used when you need independent voltage measurement per phase. Three phase PTs are more compact but less flexible. For 35kV single phase is more common.

 

Q What is the standard secondary voltage
A For 35kV systems 110V / √3 is standard for IEC markets. For North America 120V / √3 is common.

 

Q What is voltage factor
A Voltage factor is the maximum voltage the PT can withstand for a specified time. 1.2 times continuous 1.5 times for 30 seconds allows for system overvoltages.

 

Q Epoxy cast or oil immersed which is better for outdoor
A Oil immersed is better for outdoor. Epoxy cast requires additional weather protection.

 

Q Do you provide three phase PT for 35kV
A Yes we offer both single phase and three phase 35kV PTs. Specify your requirement.

 

 

Hot Tags: 35kV Single Phase Potential Transformer 35kV Single Phase PT for Switchgear, China 35kV Single Phase Potential Transformer 35kV Single Phase PT for Switchgear manufacturers, suppliers, factory, 20kv Single Phase Potential Transformer, 35kv Post Type Current Transformer, 35kv Single Phase Potential Transformer, 35kv Post Type Current Transformer Extended Out Put, 24kv Post Type Current Transformer, 20 35kv current transformer