SW70V-12KV 125A 3P Solid-insulated RMU Core Assembly

SW70V-12KV 125A 3P Solid-insulated RMU Core Assembly

Solid-insulated RMU (Solid Insulated Ring Main Unit) is a compact medium-voltage switchgear (12-40.5kV) that uses solid insulating materials (such as epoxy resin) instead of traditional SF6 gas. The Core Assembly is its key functional module. It features high reliability, environmental friendliness and maintenance-free operation.
Send Inquiry
Description

SW70V-12KV 630A 3P split-type Circuit breaker RMU core assembly

 

product-791-776

 

 

 

Products Description

Solid-insulated RMU (Solid Insulated Ring Main Unit) is a compact medium-voltage switchgear (12-40.5kV) that uses solid insulating materials (such as epoxy resin) instead of traditional SF6 gas. The Core Assembly is its key functional module. It features high reliability, environmental friendliness and maintenance-free operation.

 

Features

Solid insulation: Epoxy resin encapsulation, free of SF6, environmentally friendly and maintenance-free.

Compact and modular: Integrated three workstations (closed - open - grounded), small in size.

High reliability: Moisture-proof and dust-proof, suitable for harsh environments (-40℃ to +70℃).

Intelligence: Optional monitoring sensors are available, and remote control is supported.

 

Application

Urban distribution ring networks, new energy power stations, industrial distribution.

 

Advantages

No risk of gas leakage, maintenance-free and long service life;

 

Products Precautions

 

a) Ambient Temperature:
Upper limit +80 *C , Lower limit -25 'C , The average temperature measured within 24 hours shall not exceed 35 "C
b) Altitude: ≤ 3,000 meters.
c)Installation Environment
The surounding air should not be significantly contaminated by dust, smoke, corrosive/flammable gases, vapors, or salt mist
d) Relative Humidity:
Daily average ≤ 95%, Monthly average ≤ 90%.
e)Electromagnetic Interference:
The induced electromagnetic interference amplitude in the secondary system shall not exceed 1.6 kV
f) Vibration Conditions:
No frequent severe vibrations, seismic intensity shall not exceed 8 degrees.
g) Application Site: Indoor use only.
Note: lf the environmental conditions exceed the specified range, the user must consult with the manufacturer to confirm feasibility

 

Products Parameters

 

Item Unit Circuit Breaker Unit Load Switch Unit Switch-Fuse Combinations Unit
Rated Voltage kV 12 12 12
Rated Frequency Hz 50 50 50
Rated Current A 630/1250 630/1250 Dependent on Fuse Current Rating
Rated Insulation Level        
- Power Frequency Withstand Voltage (Phase-to-Phase/Phase-to-Ground) kV 42 42 42
- Power Frequency Withstand Voltage (Vacuum Interrupter/Isolation Gap) kV 48 48 48
- Power Frequency Withstand Voltage (Control and Auxiliary Circuits) kV 2 2 2
- Lightning Impulse Withstand Voltage (Phase-to-Phase/Phase-to-Ground) kV 75 75 75
- Lightning Impulse Withstand Voltage (Vacuum Interrupter/Isolation Gap) kV 85 85 85
Rated Short-Time Withstand Current kA 20 (25)/45 20 (25)/45 -
Rated Peak Withstand Current kA 50 (63) 50 (63) -
Rated Short-Circuit Making Current kA 50 (63) 50 (63) Limited by High-Voltage Fuse
Rated Short-Circuit Breaking Current kA 20 (25) 20 (25) Limited by High-Voltage Fuse
Rated Transfer Current A - - 1700
Rated Active Load Breaking Current A - - -
Rated Closed-Loop Breaking Current A 630 630 -
Internal Arc Fault Test (AFLR Class) kA/S 20 (25)/0.5S 20 (25)/0.5S -
Partial Discharge (at 1.2Ur) PC ≤10 ≤10 -
Ingress Protection (IP) Rating (Cabinet) - IP4X IP4X IP4X
Main Circuit Resistance μΩ ≤120 ≤120 -
Mechanical Endurance        
- Circuit Breaker/Load Switch Times 10000 10000 10000
- Disconnector/Grounding Switch Times 3000 3000 3000

 

Products Dimensional

 

product-771-812

 

 

 

 

 

 

 

Products FAQ

 

Q 1. Are you factory?
A.YES, Welcome to visit our company and factory.

Q 2. How's the delivery time?
A. Usually it will take about 7-30 days for MOQ.

Q 3.Can you design customer's packing?
A.YES.We can customized the package for you.

Q 4.Do you have ability for OEM/ODM cooperation?
A.OEM/ODM cooperation is welcomed. And we have full experience about them.

Q 5.We wants to know month capacity.
A. lt depends on which model. Generally, month capacity can reach near 100,000pcs.

 

 

Hot Tags: sw70v-12kv 125a 3p solid-insulated rmu core assembly, China sw70v-12kv 125a 3p solid-insulated rmu core assembly manufacturers, suppliers, factory, mv switchgear component, ring main unit operating mechanism, Operating Mechanism For Vacuum Circuit Breaker