Wenzhou Shuowei Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of semi solid seal isolation operating mechanism for gas insulated switchgear in China, also supports customized service. Welcome to wholesale bulk advanced semi solid seal isolation operating mechanism for gas insulated switchgear in stock here from our factory. If you have any enquiry about quotation, please feel free to email us.
Semi Solid Seal Isolation Operating Mechanism for Gas Insulated Switchgear

Products Description
What is a semi solid seal isolation operating mechanism ?
A Semi Solid Seal Isolation Operating Mechanism is a mechanical drive device specifically designed for operating isolation switches or disconnectors in gas insulated switchgear GIS and environmentally friendly switchgear. It transmits motion from the external operating handle or motor to the internal isolation contacts through a semi solid sealed interface that prevents gas leakage while allowing smooth mechanical transmission.
Unlike traditional magnetic coupling or bellows seals, the semi solid seal uses a viscous semi solid material as the sealing medium. This provides lower operating torque, higher reliability, and zero gas leakage over the lifetime of the switchgear. It is ideal for SF6 free switchgear where gas tightness is critical.
Products Parameter
| Parameter | Value |
|---|---|
| Rated voltage | 12kV 24kV 40.5kV |
| Operating torque | 15 to 40 Nm depending on switch design |
| Mechanical endurance | 5000 to 10000 operations |
| Positions | 2 position close open or 3 position close open earth |
| Seal type | Semi solid seal gas tight |
| Leak rate | Zero detectable leakage |
| Operating temperature | -40C to +70C |
| Operation mode | Manual or motor operated |
| Material | Stainless steel housing corrosion resistant |
Products Drawing

Products FAQ
Q: What is the advantage over magnetic coupling?
A: Lower operating torque 15 to 40 Nm vs 40 to 80 Nm. No magnetic degradation over time. Lower cost.
Q: Is this suitable for SF6 free switchgear?
A: Yes. Designed for both SF6 and SF6 free gases including clean air and nitrogen.
Q: What is the leakage rate?
A: Zero detectable leakage with helium mass spectrometer testing.
Q: Manual or motor which should I choose?
A: Manual for local operation cost saving. Motor for SCADA remote control.
Q: Does this replace OEM isolation mechanisms?
A: Yes with dimensional verification. Provide your existing mechanism drawing for cross reference.
Q: What is the operating temperature range?
A: -40C to +70C suitable for all climates.
Q: Can the mechanism be padlocked?
A: Yes padlockable in open and earth positions for maintenance safety.
Q: Do you provide test reports?
A: Yes seal integrity test helium leak test mechanical endurance test and torque test reports available.
Hot Tags: Semi Solid Seal Isolation Operating Mechanism for Gas Insulated Switchgear, China Semi Solid Seal Isolation Operating Mechanism for Gas Insulated Switchgear manufacturers, suppliers, factory, ring main unit operating mechanism, Operating Mechanism For Vacuum Circuit Breaker, mv switchgear component

