Prefabricated Switchgear – Modular E-house / Compact Substation for MV/HV Applications

Prefabricated Switchgear – Modular E-house / Compact Substation for MV/HV Applications

prefabricated switchgear prefab substation compact substation e-house switchgear skid mounted switchgear
Send Inquiry
Description

Wenzhou Shuowei Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of prefabricated switchgear – modular e-house / compact substation for mv/hv applications in China, also supports customized service. Welcome to wholesale bulk advanced prefabricated switchgear – modular e-house / compact substation for mv/hv applications in stock here from our factory. If you have any enquiry about quotation, please feel free to email us.

 

 Prefabricated Switchgear

– Modular E-house Compact Substation for MV/HV Applications

 

The Prefabricated Switchgear (also known as Prefab E-house, Compact Substation, or Skid-mounted Switchgear) is a factory-assembled, modular electrical enclosure that integrates medium or high voltage switchgear, protection relays, auxiliary power, lighting, HVAC, and fire detection systems into a single, transportable unit. It is delivered to site fully wired, tested, and ready for connection, significantly reducing on-site construction time and civil works.

 

Designed for outdoor use, the unit is built inside a weatherproof, thermally insulated steel enclosure (typically 20ft, 30ft, or 40ft ISO container dimensions). It is suitable for 12kV to 40.5kV systems (and up to 145kV with custom design), with configurations including incomer feeders, outgoing feeders, bus couplers, PT metering, and capacitor banks.

1
 

With the development of modern industry, the degree of automation and intelligence of electrical control equipment is getting higher and higher. The use of modern electronic technology, sensor technology, communication technology, computer network technology, the power equipment under normal and accident conditions of monitoring, protection, control, measurement and other integration. To achieve good management in this way has become an inevitable trend and development direction.

 

Outdoor high pressure ring cage (standardized) is the use of foreign advanced technology. It will be 12/24kV switchgear, circuit breaker, load switch, current and voltage transformer, 12/24kv power supply PT, FTU,RTU, communication control terminal (CCu), 12/24kV metering and automatic meter reading, USP power supply and indicating instruments installed and adjusted into a movable, sealed moisture-proof stainless steel box. Thus, the integration of the primary and secondary systems of the urban distribution network and the modularization of the assembly are realized, the construction period is shortened, and the reliability of the operation of the urban power network is greatly improved.

 

2
Technical Parameters

 

Item

Unit

Load switchgear/combined electrical cabinet

Rated peak withstand current

kA

50/63

Closed-loop breaking current

A

630

Rated charging breaking current of the current

A

25

Rated no-load transformer breaking current

A

16

Rated breaking transfer current

A

1750

Expected short circuit breaking current (RMS)

kA

63

Ground switch short-time withstand current / duration

kA

25kA/1s

Number of times the rated current is broken

time

≥200

Mechanical life

time

≥200o

Annual leakage rate of SF6 gas

 

<1%

Rated breaking transfer current

A

1750

Rated insulation level

1min power frequency withstand voltage

Between open contacts

kv

48

(Effective value)

Interphase

kv

42

 

Opposite

kv

42

Lightning impulse withstand voltage

Between open contacts

kv

85

(Peak value)

Interphase

kv

75

 

Opposite

kwv

75

Spring operating mechanism

 

Manual (Can be upgraded to electric)

Operating voltage

v

DC48V/ AC220V

Outer insulation creepage ratio

mm/kv

≥20

Different periods of opening

ms

<5

Different periods of closing

ms

<5

Main loop resistance

uΩ

<140

Shell protection level

 

IP4x

 

4
Dimensional drawing

 

3

 

Hot Tags: Prefabricated Switchgear – Modular E-house / Compact Substation for MV/HV Applications, China Prefabricated Switchgear – Modular E-house / Compact Substation for MV/HV Applications manufacturers, suppliers, factory, Switch Equipment For Ring Main Unit, Cable Branch Cabinet, mv switchgear, Prefabricated Switchgear