1250A Load Switch for GIS Switchgear 3 Position SF6 Insulated

1250A Load Switch for GIS Switchgear 3 Position SF6 Insulated

Rated voltage:12kV Rated current:1250A Rated short circuit breaking current:25kA
Send Inquiry
Description

Wenzhou Shuowei Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of 1250a load switch for gis switchgear 3 position sf6 insulated in China, also supports customized service. Welcome to wholesale bulk advanced 1250a load switch for gis switchgear 3 position sf6 insulated in stock here from our factory. If you have any enquiry about quotation, please feel free to email us.

 

1250A Load Switch for GIS Switchgear 3 Position SF6 Insulated

 

10

 

Products Description

 

What is a GIS load switch

 

A 1250A Load Switch for GIS Switchgear is a three position SF6 insulated switching device installed inside gas insulated switchgear GIS. It provides load breaking and making at 1250A continuous current as well as visible isolation and grounding for safe maintenance.

 

Rated for 12kV to 40.5kV systems this load switch is sealed in a stainless steel tank filled with SF6 gas. It operates maintenance free for over 30 years and is ideal for compact substations ring main units and wind solar collector systems.

 

Products parameters

 

No. Item Unit Technical Parameters
1 Rated Frequency Hz 50
2 Rated Current A 1250
3 Rated Short-Time Withstand Current kA 25
4 Rated Peak Withstand Current kA 50/63
5 Rated Short-Circuit Duration s 4
6 Rated Short-Circuit Making Current kA 50
7 Theoretical Operating Cycles Times 5000

 

Products Drawing

 

 

11

 

Products FAQ

 

 

Q What is the difference between GIS load switch and circuit breaker
A Load switch makes and breaks load current up to 1250A but cannot interrupt short circuit current. Circuit breaker can interrupt short circuit current. This product is a load switch.

 

Q What is the advantage of SF6 sealed design
A Sealed for life no gas refilling no maintenance corrosion free 30 year service life.

 

Q What is the typical gas pressure
A 0.03 to 0.05 MPa relative pressure.

 

Q What is the cubicle width required
A Typically 400mm to 600mm depending on configuration.

 

 

 

 

Hot Tags: 1250A Load Switch for GIS Switchgear 3 Position SF6 Insulated, China 1250A Load Switch for GIS Switchgear 3 Position SF6 Insulated manufacturers, suppliers, factory, Indoor H V Vacuum Load Break Switch, FN7 12 KV Indoor H V Load Breaking Switch With Fuse