A load switch is a type of switchgear that is located between a circuit breaker and an isolation switch. It has a simple arc extinguishing device and can cut off the rated load current and a certain overload current, but cannot cut off the short-circuit current. Usually equipped with a simple arc extinguishing device, but its structure is relatively simple. The working process is as follows: when the valve is opened, the main shaft rotates clockwise under the action of the opening spring, and on the one hand, the piston moves upward through the crank slider mechanism to compress the gas; On the other hand, through a transmission system composed of two sets of four-bar linkage mechanisms, the main blade is first opened, and then the arc extinguishing blade is pushed to open the arc contact. The compressed air in the cylinder blows out the arc through the nozzle.
Basic Concept Of Load Switch
Nov 08, 2024
Leave a message
