Dropout Fuse Cutout,cheaper and safer
Drop out Fuse are the most widely used over current protection devices in distribution networks. Its core feature is that after the melting core melts, the melting tube automatically drops under the action of gravity, forming a visible disconnection point, while also having the functions of protection and mechanical isolation.
Functions and features
1.Overload and short circuit protection
When overload or short circuit faults occur in the distribution network, the fuse will melt due to excessive current, thereby cutting off the faulty circuit and protecting the backend equipment.
2. Isolate visible breakpoints
After melting, the fuse tube automatically drops, forming a visible gap for disconnection, which can prove that the circuit has been disconnected without the need for electrical inspection, making it easy for safe maintenance.
3.Split load current
Within the rated current range, the insulation rod can be operated to directly open and close the circuit, controlling the current condition of small transformers or branch lines.

Working principle
1. Normal state
Tighten the melting core and melting tube to lock the upper and lower contacts inside the stationary contacts, and the circuit is conductive.
2.Fault circuit breaker
Excessive current causes the melting core to melt → an arc occurs inside the melting tube, and the gas producing material produces gas → the gas blows longitudinally and extinguishes the arc → the tension of the melting core disappears → the lower contact loosens → the melting tube falls and hangs, forming a breakpoint.
3.Manual operations
Closing: Hook the upper ring of the melting tube with an insulating rod and push it upwards into the slot of the static contact.
Opening: Hook the upper ring and pull it downwards, causing the melting tube to detach from the static contact and fall.
Advantage
1.Low cost, strong reliability: simple structure, low cost, suitable for harsh outdoor environments.
2.The disconnection point is very obvious: it can directly determine the on/off status of the circuit, which is convenient for safe maintenance.
3.Strong arc extinguishing ability: Gas producing materials efficiently extinguish arcs under high short-circuit currents.
4.Convenient replacement: After melting, only the fuse tube needs to be replaced without the need for overall disassembly.
