How Do I Know What Fuse I Need?

Mar 01, 2025

Leave a message

When determining what type of fuse you need, consider the following key factors

1. Circuit parameters

Rated current (In)

The rated operating current marked on the fuse is determined by the manufacturer and indicates the current that the fuse can carry.

When selecting, make sure that the rated current of the fuse is greater than the normal operating current of the circuit, but considering the safety margin, usually choose a fuse slightly greater than the normal operating current.

Note the current derating of different certification standards. For example, for fuses certified according to UL standards, the actual steady-state operating current should not exceed 75% of the rated current; while for fuses certified according to IEC standards, the actual steady-state operating current can be equal to the rated current.

Rated voltage (Un)

The rated voltage marked on the fuse indicates the maximum operating voltage that the fuse can be used.

The rated voltage of the fuse must be equal to or greater than the effective voltage of the circuit to ensure that it will not blow under normal operating voltage.

2. Working environment

Ambient temperature

The current carrying capacity test of the fuse is usually carried out at an ambient temperature of 25°C.

The higher the ambient temperature, the higher the operating temperature of the fuse and the shorter its life.

Therefore, when selecting a fuse, it is necessary to adjust the selection of the rated current according to the actual working environment temperature.
Space limitations
According to the size and shape of the installation space, select the appropriate fuse size and type.
3. Special needs
Breaking capacity
Also known as breaking capacity or short-circuit rated capacity, it refers to the maximum current that the fuse can safely cut off under the specified voltage.
When selecting, it is necessary to ensure that the breaking capacity of the fuse is greater than the maximum fault current in the circuit.
Time-current characteristic curve
It is one of the most important parameters of the fuse, which indicates the relationship between the overload current and the melting time.
According to the protection requirements of the circuit, select the appropriate time-current characteristic curve.
Nominal melting heat (I²t)
It is the energy value required to disconnect the fuse, which is an inherent parameter of the fuse itself.
When selecting, it is necessary to consider the maximum fault energy that may occur in the circuit and ensure that the I²t value of the selected fuse is greater than this energy value.
Other special needs
Such as pulse, impact current, surge current, starting current and circuit transient value, these factors may also affect the selection of fuses.
4. Certification standards
According to the market requirements where the product will be sold, select the safety certification mark and safety standards of the fuse, such as UL standard or IEC standard.
5. Installation and maintenance
The fuse should be installed in a position that is easy to observe and replace, so that it can be replaced in time when the fuse blows.
During the installation process, it should be ensured that the fuse matches well with other components in the circuit, the contact is tight, and looseness is avoided.
When selecting a fuse, it is necessary to consider multiple factors such as circuit parameters, working environment, special needs, certification standards, installation and maintenance. By comprehensively considering these factors, it can be ensured that the selected fuse can meet the protection needs of the circuit and has good reliability and safety.