What is the SF6 insulated Load break switch?
SF6 insulated load switch is a MV/HV electrical equipment that uses sulfur hexafluoride (SF6) gas as insulation and arc extinguishing medium. It is mainly used for load current switching, overload protection, and circuit isolation in power systems. Its core advantages lie in high insulation strength (about three times that of air) and efficient arc extinguishing capability, suitable for voltage levels of 10kV~40.5kV. It is a core component in urban power grids, industrial distribution, and new energy fields.
Description
12kV 24kV 40.5kV

12kV Indoor SF6 Switch-Disconnector FL(R)N36 Load Break Switch LBS is a double-break rotary load switch using SF6 gas as the insulating and arc-extinguishing medium. It is suitable for 12kV power distribution systems. Each switch is permanently sealed after being filled with 0.4bar pressure SF6 gas. The switch can be installed vertically or horizontally. The typical installation method in the ring main unit is to install a steel partition horizontally between the cable room and the busbar room. This installation method isolates the busbar from the cable joint to comply with safety requirements for operation and maintenance.
Combining the FLN36-12 indoor high-voltage SF6 load switch with other electrical components can realize control and protection functions and serve as the control and protection of electrical equipment in industrial and mining enterprises, civil power supply and secondary substations. Among them, the FLRN36-12kV load switch-fuse combination appliance matches the protection characteristics of the transformer and is especially suitable for ring network power supply units.
24kV Indoor SF6 Switch-Disconnector FL(R)N36 Load Break Switch LBS and fuse combination appliance are suitable for power stations and industrial electrical equipment powered by three-phase AC 50Hz ring network or terminal It is used as load control line protection for 24kV power system. The load switch switches load current, closed-loop current, no-load transformer and cable charging current; the combined electrical appliance can break any current up to the rated short-circuit breaking current, and is suitable for complete sets of electrical equipment such as ring network units and box-type substations.
It is especially suitable for power distribution in urban residential areas, small secondary substations, switch offices, industrial and mining enterprises, large shopping malls, airports, subways, hospitals, stadiums and other places.
The product complies with GB3804, GB16926, IEC 60265-1 and GB16926, IEC60420 standards.


40.5kV Indoor SF6 Switch-Disconnector FL(R)N36 Load Break Switch LBS is a double-break rotary load switch using SF6 gas as the insulating and arc-extinguishing medium. It is suitable for 35-40.5kV power distribution systems. Each switch is permanently sealed after being filled with 0.4bar pressure SF6 gas. The switch can be installed vertically or horizontally. The typical installation method in the ring main unit is to install a steel partition horizontally between the cable room and the busbar room. This installation method isolates the busbar from the cable joint to comply with safety requirements for operation and maintenance.
The product complies with GB3804, GB16926, IEC 60265-1 and GB16926, IEC60420 standards.

