What Is A High-voltage Bushing?

May 15, 2025

Leave a message

A high-voltage bushing is a device for one or more high-voltage conductors to pass through a partition with a different potential (such as a wall, metal casing of power equipment, etc.). It plays a key role in insulation and support in the power system. The following is an introduction for you:

Structural composition

External structure: including terminal block, lead connector, rain cover, oil gauge, oil plug, oil pillow, upper porcelain sleeve, end screen, lifting ring, oil extraction valve, nameplate, vent plug, connecting sleeve, lower porcelain sleeve, equalizing ball, and other components.

Internal structure: a multi-layer cylindrical capacitor core composed of oil-impregnated cable paper and an aluminum foil equalizing electrode is used as the main insulation, and the porcelain part is used as the external insulation and the container of transformer oil.

Classification method

By use, it can be divided into wall bushing, transformer bushing, GIS outlet bushing, etc. Wall bushings are used to guide high-voltage wires through walls, partitions, or grounding barriers. They are widely used in high-voltage systems such as power plants and substations to ensure reliable electrical connections and safe electrical insulation at wall penetration sites. Transformer bushings lead high-voltage wires inside the transformer to the outside of the oil tank, serving as both ground insulation for the lead wires and fixing the lead wires. GIS lead bushings are used in gas-insulated metal-enclosed switchgear (GIS) to achieve connection and insulation between high-voltage conductors and the outside.

According to insulation materials and insulation structures, they can be divided into single insulation bushings (which are further divided into pure porcelain and resin bushings) and capacitor bushings (which are further divided into oil-paper capacitors and adhesive-paper capacitors). Capacitor bushings are the most commonly used type in current high-voltage and ultra-high-voltage systems. They consist of an intermediate flange (connection sleeve), a capacitor core, an outer insulating sleeve, etc. There are multiple layers of metal plates in the capacitor core, which can force the electric field inside and on the surface of the bushing to be uniform.

According to the current-carrying structure, the bushing of an oil-paper capacitor transformer can generally be divided into cable-threading type and conduit-threading type. Among them, the conduit-threading type can be divided into direct type and rod-threading type according to the connection method between the oil terminal and the bushing. Cable-threading-type and direct conduit-threading-type bushings are widely used in power systems.

Performance requirements

Electrical strength: It must have the specified electrical strength and be able to withstand high voltage without breakdown to ensure that the transformer will not short-circuit or have an electrical breakdown when operating in a high-voltage environment. For example, in the UHV transmission system, the high-voltage bushing needs to withstand extremely high voltage, and its electrical strength must meet strict standards.

Mechanical strength: It must have sufficient mechanical strength to withstand mechanical stress such as its own weight, lead wire tension, and electric force during a short circuit to ensure that the bushing will not be deformed or damaged during operation.

Thermal stability: It has good thermal stability and can withstand instantaneous overheating during a short circuit to prevent insulation performance degradation. When a short-circuit fault occurs in the transformer, the bushing will pass a huge short-circuit current and generate a lot of heat. Good thermal stability can ensure that the bushing can still work normally under this condition.

Sealing performance: adopt sealing designs, such as rubber pad or epoxy resin sealing, to ensure that the insulating oil inside the transformer will not leak to the outside. At the same time, the transformer oil inside the bushing is an independent system, which is not affected by the atmosphere to maintain the stability of the insulation performance.

Other performance: It should have the characteristics of small size, light weight, strong versatility, and easy maintenance to adapt to different installation environments and usage requirements and reduce installation and maintenance costs.

Matching design

Voltage balancing ball: The tail of the bushing is equipped with a voltage balancing ball, which is used to improve the electric field distribution, thereby reducing the insulation distance between the tail of the bushing and the grounding part and the coil, and improving the electrical performance and safety of the bushing.

Oil pillow: The head of the bushing is equipped with an oil pillow to adjust the oil volume change caused by temperature changes so that the inside of the bushing is free from large pressure. The oil gauge on the oil pillow can be used to monitor the oil level during operation to ensure that the oil level inside the bushing is normal.

End screen: The small bushing led out on the end screen of the oil-paper capacitor bushing is used for bushing dielectric loss tests and transformer partial discharge tests. Small bushings should be reliably grounded during normal operation. When removing the small sleeve of the end screen, it is necessary to prevent the guide rod of the small sleeve from rotating and pulling out to avoid breakage of the lead wire or damage to the lead copper sheet on the plate.