A Low-voltage bushing is an insulating and connecting element (usually rated at 1kV or less) used for low voltage equipment in a power system. Its core function is to provide electrical insulation and mechanical support to conductors in different voltage areas as they pass through different media, such as air and equipment casings, while protecting conductors from external influences. Here are some details:
1.Core functions
Electrical insulation: Isolation of conductors from surrounding media (such as metal casings, other circuits) to prevent leakage or short circuits.
Mechanical protection: fixing the position of the wire to prevent it from being loosened or damaged by vibration or external forces.
Environmental isolation: to prevent moisture, dust, chemicals, etc. from entering the equipment, extending the service life of the equipment.
Voltage level adaptation: suitable for low voltage systems, insulation materials and structure do not need to withstand high voltage, low cost, compact structure.
2.Typical application scenarios
Transformer low voltage side: connect transformer low voltage winding to distribution cabinet and other external circuits.
Switching equipment: When conductors pass through a switchgear, bushing is used for insulation and sealing.
Motor: The power cord enters the motor through the bushing to ensure safe connection.
Cable terminal: Sleeve provides transition insulation at the connection of cable and equipment.
3.Structure and materials
Basic structure:
Insulator: Core components are usually made of epoxy resin, silicone rubber, ceramics, etc., and have high insulation performance.
Metal flange: Used to secure sleeve, housing or mounting surface.
Conductive rod: Connects the inner conductor to the outer conductor through the center of the insulator.
Material selection:
Epoxy resin: heatresistant, corrosion resistant, high mechanical strength, commonly used in indoor equipment.
Silicone rubber: flexible, weather resistance, suitable for outdoor or vibration environment.
Ceramics: Traditional materials, high temperature resistant but fragile, gradually replaced by composites.
4. Difference from high-voltage bushing
Low pressure sleeve characteristics
Voltage level ≤1kV >1kV (usually hundreds of kV)
Thin material with low cost, extremely thick thickness, requiring multiple layers of insulation or special structures
Design is complex and Simple, focusing on Complex sealing and mechanical strength, considering electric field distribution, partial discharge and other factors.
Distribution system, low voltage motor, transformer low voltage side, substation, high voltage transmission equipment
V. Select an installation point.
Rated voltage/current: equipment parameters need to be matched to avoid overload.
Environmental conditions: Selection of materials (e.g. outdoor silicone rubber) based on temperature, humidity and pollution level.
Installation method: ensure flange fastening equipment to prevent leakage or water ingress.
Maintenance inspection: Check for cracks and creepage marks on insulated surfaces and replace ageing bushing in a timely manner.
6. Scene examples
In factory distribution cabinets, low voltage bushing may be used for:
The conductor of the input cable passes through the metal box wall and is connected to the internal circuit breaker.
The bushing insulator separates the conductor from the cabinet to prevent workers from being electrocuted.
The metal flange is bolted to the cabinet to ensure mechanical stability.
the low-voltage bushing is not easy to find, but it is a key component to ensure safe and reliable operation of low voltage electrical system. Electrical performance, mechanical strength and environmental adaptability must be taken into account when designing.
What Is A Low Pressure Bushing?
Jul 01, 2025
Leave a message
