Off-load tap changers are also typically located on the high-voltage (HV) side of a transformer, similar to on-load tap changers (OLTCs). The reasons for this are largely based on practicality, design efficiency, and operational considerations. Here are the key reasons:
1. Lower Current on the HV Side:
- The HV side operates at higher voltage but lower current compared to the low-voltage (LV) side.
- Since the current is lower, the mechanical and thermal stresses on the tap changer components are reduced, making the design simpler and more cost-effective.
2. Finer Voltage Adjustment:
- The HV winding has more turns than the LV winding, allowing for smaller and more precise adjustments in the turns ratio.
- This enables better voltage regulation when the transformer is de-energized and the taps are changed.
3. Reduced Size and Cost:
- Because the current is lower on the HV side, the tap changer components (such as contacts and switches) can be smaller and less expensive.
- Designing a tap changer for the LV side, where currents are higher, would require larger, more robust, and costlier components.
4. Standard Practice and Compatibility:
- Placing the tap changer on the HV side is a well-established practice in transformer design.
- It ensures compatibility with grid requirements, as voltage regulation is often needed on the transmission (HV) side to compensate for voltage drops over long distances.
5. Simpler Design and Maintenance:
- Off-load tap changers are manually operated and do not need to handle the stresses of switching under load.
- Placing them on the HV side simplifies the design and makes maintenance easier, as the components are smaller and less complex.
6. Lower Energy Losses:
- Since the current is lower on the HV side, the energy losses associated with the tap changer are minimized.
- This is particularly important for off-load tap changers, as they are not designed to handle the high currents and arcing associated with on-load switching.
Why Not on the LV Side?
- Higher Current: The LV side operates at higher currents, which would require larger, more expensive tap changer components.
- Coarser Adjustment: The LV winding has fewer turns, making it harder to achieve fine voltage adjustments.
- Increased Losses: Higher currents on the LV side would lead to greater energy losses during tap changing.
Exceptions:
In some specialized applications, such as distribution transformers or transformers used in industrial settings, off-load tap changers may be placed on the LV side if precise voltage control is required for specific loads. However, this is less common.
Summary:
Placing the off-load tap changer on the HV side is a practical and efficient choice due to the lower current, finer voltage control, reduced cost, and compatibility with standard transformer designs. This placement ensures reliable operation and easier maintenance while minimizing energy losses.
