China fuse potential transformer series Manufacturers Factory Suppliers
-
JDZ8-10R Voltage Transformer – 10kV / 12kV Potential Tran...10kV voltage transformer JDZ8-10R potential transformer epoxy resin VT 12kVread more
-
10kV indoor single phase Current TransformerIEC60044-1 Rated voltage:12/42/75kV Rated secondary current:5A or 1A Rated frequency:50Hz or 60Hzread more
-
10kv Current Transformer Differential ProtectionVoltage: 10 kVread more
Differential protection
Enhancement type
Casting resin insulated -
10kV LZZBJ9 Series Voltage TransformerRated Voltage: 10kVread more
Enhancement type
With protection
Casting resin insulated -
Dry Type Outdoor Discharging CoilSingle-phase outdoor typeread more
Maximum matching capacitor capacity
The rated voltage at a time
With the secondary winding -
Sf6 Integrated Special Voltage TransformerWith fuse 10kV With residual voltage winding Single phaseread more
-
10kv Combined Three Phase Potential Transformer with FuseWith fuseread more
10kV
"V" type wiring manner
Casting resin insulated -
10kv Combined Three Phase Potential Transformer Bushing I...With fuseread more
10kV
V type wiring manner
Casting resin insulated -
10kv Three Phase Potential Transformer with FuseRated Voltage: 10 kVread more
With fuse for protection
"Y" type connection
Casting resin insulated -
20kv Single Phase Potential Transformer with FuseVoltage: 35 kVread more
With fuse tube
With residual voltage winding
Casting resin insulated -
35kv Single Potential Transformer with FuseRated voltage: 10kVread more
Extended output
With protective class
Cast-resin insulated -
35kv Post Type Potential Transformer HighlandHighland typeread more
Rated voltage (kV): 35
Outdoor type
Casting insulation
BussmannTM series indicating and non-indicating E-Rated, current-limiting, medium voltage fuses for potential, small power and control transformers....
Potential Transformer (PT) fuses are current limiting fuses with high interrupting ratings designed for the protection of potential transformers. Application Note: When applying fuses for the...
The PT fuse is used to protect the primary windings of a potential transformer or control power transformers (CPT). A PT fuse is a small dimension ferrule type fuse that mounts in standard clips....
Potential Transformer (PT) fuses are current limiting fuses with high interrupting ratings designed for the protection of potential transformers. Application Note: When applying fuses for the...
• Blown-fuse indicator to give positive identification of open fuse fuse is available on the 9F60 series. Length Clip Centers Diameter Ferrule Length Potential Transformer Amp-Trap® and...
5.5kV Potential Transformer fuses – 9F60 Series, EJ-1 8.12" (206 mm) Clip Centers POTENTIAL TRANSFORMER Amp-Trap® and 9F60 Series PT Fuses...
