China transformer components Manufacturers Factory Suppliers
-
sidewall mounted Bay O Net Fuse Holder up to 38kVThe bay o net fuse holder is designed for use in pad mounted or subsurface distribution transformer. Model:PRNT-15/25KV PRNT-38KVread more
-
Oil immersed current limited backup fuseused in transformers to protect and isolate faulted equipment Rated current:20A~315A Rated voltage:15.5kV 25kV 40.5kVread more
-
35kV Oil Load Break Switch for Transformer 630A ANSI/IECVoltage class: 35kV (34.5kV / 36kV / 38kV) Rated current: 630A Short-circuit making: 40kA / 50kA (peak) Short-time withstand: 16kA – 25kA / 3s Positions: 2 (ON/OFF) or 3 (ON/OFF/GROUND)read more
-
25kV 630A Single Phase Flip type transformer loadbreak sw...FYB-24/630-25-J1-L Single Phase Two Position Loadbreak Switchread more
-
Full Range FuseThis product is suitable for use in power systems with an AC rated frequency of 50Hz and a rated voltage of 12~40.5kV, as an overload and short-circuit protection component for power transformers...read more
-
SMRS Dual Sensing Fuse – Back-up Protection for Distribut...SMRS dual sensing fuse Dual sensing fuse SMRS fuse transformer protection Back-up fuse MV transformers Striker pin fuseread more
-
Isolation LinkThe isolation link is used in series with Bay-O-Net fuse link to provide extra protection for transformer. Isolation links are not fuses and do not have an interrupting rating.read more
-
Transformer off Load Linear Tap changerThis instruction is suitable for strip-type off-circuit tap changer with its frequency of 50, 60Hz, rated current 63A and below, and rated voltage 33kV (Called tap changer below). This tap changer...read more
-
1KV 800A BushingTransformer bushing is an outlet device for the high and low voltage leads inside the transformer to the outside of the fuel tank. It has specified electrical strength and adequate mechanical...read more
-
630A 35kV 4 Position Oil Loadbreak Switch – for Pad-Mount...pad mounted transformer load break switch oil loadbreak switch for padmount transformer 35kV transformer load switchread more
Oct 12, 2022 · A transformer is an electrical device that is used to change voltage range; either increasing it to a certain level or decreasing it to a certain level. It is one of the most basic...
Protection Transformers: They are used for component protection purposes. In circuits, some components must be protected from voltage fluctuation etc. Protection transformers ensure component...
Transformer components, such as bushings , tap-changers , insulation , accessories, and other transformer consumables are essential parts of ensuring that transformers operate reliably...
Nov 09, 2012 · The principal parts of a transformer are two coils of wire, called the primary winding and the secondary winding, wound on some type of core material. An enclosure protects the...
Transformer Components - Temperature Monitors, Cooling Fans, Bushings, Loadbreak Connectors, Fuse Links, Arresters, More Transformer components Most local distributors don't stock all of the...
Specialty Transformer Components provides integrated solutions for products and services in the electrical generation, transmission, and distribution sectors. We work with our customers to deliver...
